Fiber kabl 48 vlakana 9/125 singlemode outdoor Draka, sa zaštitom od glodara, vrlo robustan MDPE omotač, centralni element ojačanja (CSM) za postupak "uduvavanja", moguće i direktno ukopavanje, 5000N, A-DQ(ZN)B2Y 4x12E9

ISO 11801 2nd edition EN 187 000
IEC 60794-2 IEC 60794-2-20
EN 50 173-1 IEC 60794-2-21


Construction Central strength member ø2.5 mm FRP rod
Lose tube ø2.3 mm jelly filled loose tubes, with 2 – 12 fibres each, up to 22 tubes in two layers, for lay-up
Water blocking The core is water blocked using swellable tape and tread
Wrapping Polyester nonwoven
Strain Relief Glasroving elements
Ripcord Polyester ripcord for easy slitting of the sheath
Sheath 1.5 mm blue FireBur®, UV stabilized, EN 50290-2-27


Fire rating IEC 60332-1-2 Single vertical wire test
IEC 60754-1 No halogens
IEC 60754-2 No acid matters
IEC 61034-2 No dense smoke


Heat of combustion Fibre count;
6 fibre/tube Fibre count;
8 fibre/tube Fibre count;
12 fibre/tube MJ/km KWh/m
6-36
8-48
12-72 2200 0,61
42-48

2900 0,81


Physical properties Tensile strength (dynamic) E1 6000 N
Tensile strength (permanent) E1 4000 N
Compressive strength (crush) E3 3000N
Impact E4 25 Nm
Torsion E7 5 cycles ± 1 turn
Kink E10 The cables do not form a kink when a loop is drawn together to a diameter 12 times the cable nominal diameter
Temperature range F1 The cables can bear temperature cycling between -40°C to +70°C.
The cables will operate without any attenuation variation (≤0.05 dB) in the temperature interval -30°C to +60°C.
The cables will operate with a maximum attenuation variation of 0.1 dB/km in the temperature interval -40°C to +70°C.
Water penetration F5B No water on free end


Mechanical properties Fibre count;
6 fibre/tube Fibre count;
8 fibre/tube Fibre count;
12 fibre/tube Nominal
diameter Nominal
cable weight Minimum
bending radius
6-36 8-48 12-72 13,0mm 145 kg/km 160
42-48

14,5mm 180 kg/km 175


Fibre Characteristics Fibretype C06e: General purpose enhanced SM fibre
Fibre amount 48
Cut-Off Wavelenght ≤ 1260 nm
Attenuation (dB/km) 1310nm: ≤0,37; 1550nm: ≤0,22
Dispersion (ps/(nm*Km)) 18.0/22.0 (1550nm/1625nm)
Mode Field Diameter 9,2 ± 0,4µm bei 1310nm
Cladding Diameter 125,0µm ± 0,7µm
Primary Coating Diameter 242,0µm ± 7.0µm